YUMOTO Electric Injection Hydraulic Clamping Injection Molding Machine Product Introduction
YUMOTO-1500EI Product Overview:
The electric injection hydraulic clamping injection molding machine combines the advantages of electric injection and hydraulic clamping technology. It is a new type of equipment with high efficiency, precision and energy saving in the modern plastic molding industry. The injection molding machine adopts an electric drive system for injection process control to ensure high-precision and high-speed injection effects. At the same time, the hydraulic system is used to provide the power required for processes such as clamping, locking, and ejection. It is suitable for the production of a variety of plastic products.
Product Features:
1. High efficiency and energy saving:
- The electric injection drive technology is adopted to accurately control the injection speed and position and reduce energy consumption. Compared with the traditional hydraulic drive system, the power consumption is reduced.
- The electric drive system of the machine has a fast response speed and stable operation, which reduces the production instability caused by power fluctuations.
2. Precision control:
- The electric injection system provides precise injection volume, speed and pressure control to ensure the consistency and high precision of each injection, especially for products with high dimensional accuracy requirements.
- The fully electronic control system enables the machine to have a higher injection process control capability and can adapt to the complex injection process requirements.
3. Hydraulic clamping system:
- The advanced hydraulic clamping technology is adopted to provide a strong clamping force to ensure the firm locking of the mold. The hydraulic system has a large molding pressure and can meet the clamping requirements of complex and large molds.
- The clamping and demolding process is smooth and reliable, reducing mold wear and interference during production, and improving production efficiency.
4. Environmental protection and low noise:
- The electric injection system has no oil pollution, avoiding the consumption of hydraulic oil, and meets modern environmental protection standards.
- Due to the use of electric drive, the noise of the injection molding machine is greatly reduced during operation, creating a quieter working environment.
5. Intelligent control system:
- Equipped with a touch screen control panel, users can set and adjust various parameters through an intuitive interface, and the operation is simple.
- The system has an automatic diagnosis function, real-time monitoring of the machine's operating status, and provides alarm prompts to ensure the long-term stable operation of the equipment.
6. Multi-function application:
- Electric injection hydraulic mold clamping injection molding machine is widely used in many industries such as automobiles, electronics, home appliances, medical devices, consumer goods, etc., and can produce various types of plastic products with complex structures and high precision requirements.
1500EI technical parameters:
- Injection pressure: Up to 385MPa, suitable for the production of high-precision and high-strength plastic products.
- **Injection rate**: From 156 to 324g/s, it greatly improves production efficiency.
- **Injection volume**: According to different machine models, the injection volume can be adjusted to flexibly adapt to various production needs.
- **Control mode**: Fully electronic control system, precise injection and mold clamping process control.
- **Applicable mold**: Suitable for injection molding of thermoplastic plastic molds, single-cavity or multi-cavity production.
Application areas:
- **Automotive industry: Precision automotive accessories, interior trims, exterior trims, etc.
- **Electronic industry: electronic housings, connectors, electronic components, etc.
- **Home appliance industry**: housings and accessories for home appliances, etc.
- **Medical devices: high-precision medical device parts, disposable medical devices, etc.
- **Consumer products**: toys, small household appliances, office supplies, etc.
ITEM | UNIT | MOTO-1500EI | ||||
Injection Unit | Screw Diameter | mm | 25 | 28 | 32 | 36 |
Injection Speed | mm/s | 200 | ||||
Injection volume | cm3 | 69 | 99 | 129 | 163 | |
Injection weight (PS) | g | 63 | 90 | 117 | 148 | |
Injection Rate | g/s | 89 | 112 | 146 | 185 | |
Injection Pressure | Mpa | 385 | 307 | 235 | 186 | |
Screw Speed | r.p.m | 0-400 | ||||
|
||||||
Clamping Unit | Clamping Force | KN | 1500 | |||
Opening Stroke | mm | 410 | ||||
Space Between Tie-Bars | mm | 470*420 | ||||
Mold height (Min – Max) | mm | 160-500 | ||||
Ejector Stroke | mm | 120 | ||||
Ejector Force | mm | 50 | ||||
|
||||||
Others | Oil Pump Motor Power | KW | 15 | |||
Heating Power | KW | 10.1 | ||||
Machine Dimension | m | 4.66x1.28x1.72 | ||||
Machine Weight | Ton | 4.2 | ||||
Hopper Capacity | KG | 25 |