| Model | UNIT | MOTO-2200 | |||
| International Size Rating | 998 | ||||
| Electric Unit | Screw Diameter(mm) | mm | 45 | 50 | 55 |
| Injection Volume(Theoretical) | cm3 | 405.4 | 500.4 | 605.5 | |
| Injection Weight (Ps) | g | 368.9 | 455.4 | 551.0 | |
| oz | 13.0 | 16.1 | 19.4 | ||
| Injection Rate | cm3^/s | 283.9 | 350.5 | 424.1 | |
| Injection Rate | g/s | 258.4 | 319.0 | 385.9 | |
| Injection Pressure | Bar | 2464 | 1996 | 1649 | |
| Plasticizing Capacity | g/s | 32.5 | 51.6 | 61.9 | |
| Injection time | s | 1.43 | 1.43 | 1.43 | |
| Screw Speed | r/min | 300 | |||
| Injection Speed | mm/s | 178.6 | |||
| Injection Stroke | mm | 255 | |||
| Clamping Unit | Clamping Force | KN | 2200 | ||
| Mold Opening Stroke | mm | 490 | |||
| Tie-bars Diameter | mm | 575x525 | |||
| Max.mold Height | mm | 580 | |||
| Min Mold Height | mm | 200 | |||
| Min Mold Size | mm | 402x367 | |||
| Mold platen Size(HxV) | mm | 800x850 | |||
| Ejector Stroke | mm | 150 | |||
| Ejector Force | KN | 75 | |||
| Others | MAX Hydraulic Pressure | Bar | 175 | ||
| Hydraulic System Displacement(clamping) | L/min | 160.0 | |||
| Hydraulic System Displacement(ejector) | L/min | 80 | |||
| Hydraulic Motor Power(clamping) | kw | 27.8 | |||
| Hydraulic Motor Power(ejector) | kw | 15 | |||
| Heater Power | kw | 14.4 | |||
| Temp Control Zone | 3+1 | ||||
| Dry sycyle | S | ||||
| Machine Dimensions (LxWxH)(No hopper) | m | 5.69*1.6*1.86 | |||
| Machine Weight | t | 8 | |||
| Cooling-water Flow | L/min | ||||
| Hopper Capacity | KG | 50 | |||
| Oil Tank Capacity | Ｌ | 275 | |||
